“How to replace trimmer line Black and Decker?” That’s no longer a strange question for us. Black and Decker trimmers are bound to be indispensable tools for gardeners, but their lines could be damaged or worn out at times. Therefore, a trimmer line replacement is certainly necessary.
However, not everyone knows how to replace that trimmer line. If you are in the same situation, it’s advisable to follow our instructions below for a successful replacement. What are you waiting for? Let’s dive right in!
Table of Contents
- What is a Trimmer?
- How To Replace Trimmer Line Black And Decker?
- To Wrap Up
What is a Trimmer?
Do you know what a trimmer is? It is also called a string trimmer, whipper snipper, weed whacker, a weed eater, weed whip, a strimmer, or a brush cutter. Line trimmer is simply a lightweight, versatile garden tool commonly used for cutting grass, weeds, or irregular terrain.
There are a lot of trimmer models like electric trimmer, or battery-operated weed eater. A trimmer has a fast spinning head at the end of a long shaft with a spinning monofilament line. These features are expected to offer centrifugal force to cut through grass efficiently.
One special thing is that a grass trimmer can reach spots that lawnmowers can’t. These cutting tools can correctly snip the weeds and grass along sidewalks, fences, or trees so that your yards will be neater and cleaner. All in all, a line trimmer is a vital tool for any gardener.
How To Replace Trimmer Line Black And Decker?
About how to replace trimmer line black and decker, there are three main steps as follows.
#1: Detaching The Old Line And Spool
First of all, to replace the new line on your swing trimmers safely, it’s essential to disconnect any connections to your machine. If you are charging your trimmer, please unplug it or detach its ion battery. Or else, we can’t guarantee your safety during the replacement process. And if you strictly follow this advice, you won’t turn on your trimmer by chance and hurt yourself.
The next step is to lay the weed eater on a flat surface, like a table, a desk, or a chair. Why? You may ask. To support your Black and Decker trimmer with an easy replacement, you needn’t bend over regularly to proceed steps if you put it on the surface of a table since your hands will be free from grabbing it. Remember that you should select a table within reach of your waist for comfortable component replacements.
After that, when you see the cap on the Black and Decker trimmer head that covers the line, just get rid of it. To do so, you have to push down the tabs on two sides by your fingers. Then, you could simply detach the cap and reveal the below spool.
The fourth step is to push the spool out of the cap. You need to turn over the cap to pop the spool and string up. On the side of the cap, you will see two eyelets, which are responsible for keeping the line steady. Next, remove the line out of the holes, hold the spool, and jiggle it out of the cap.
The final step of this part is to take off the original line. To remove it, take it out of the eyelets and freely pull the tail end of the string. And if you want to remove all of the old strings, just apply the same process.
#2: Inserting The New Line
Another significant step is to install the new string into the strimmer’s holes on the spool. Before that, you should prepare a monofilament string with the diameter of 2.0 mm around or enter a hardware shop to buy one. However, don’t use a jagged or more massive trimmer string since it can result in overheating.
Secondly, you must follow the shafts on the spool to wrap the string around it. Put the string via the hole, then wind it around the trimmer spool. One thing you should keep in mind is that if you overlap the trimmer spool, it is likely to get twisted when you begin conducting. Rather than that, you had better wind the line side by side to proceed smoothly.
Plus, you have to shorten the line. We highly recommend you to use gardening shears or sharp scissors to cut the string. After finishing wrapping the line surrounding the spool, you have to leave an end part of the line, about 6 inches. Then, lace that string through the holes to secure it in the right place.
Also, repeat the same process to wrap, and protect the other string. Bear in mind to go along the spool’s arrows while you are wrapping up the trimmer line. That is the end of this second step. Now we are going to move to the final crucial step.
#3: Installing The New Spool
Inserting the new spool will not trouble you anymore if you follow our guides carefully. Firstly, put the trimmer spool into the built-in cap as long as the eyelets and the spool are lined up precisely. Secondly, you should align the hole in the spool’s center with the cap’s center. Thirdly, return the spool to the cap, and turn over the cap. You must guarantee that the trimmer spool is in safety by shaking it.
Next, you will see the eyelets on the cap, simply lace the string through them. Pull the redundant string free from the spool’s apertures and into the holes of the cap. You must line up the cutting head and the tabs, then press down. Accordingly, to fit in the cutting head, press the tabs down and gently press on the trimmer cap. Once a click is emitted from the trimmer line, voila, your task is done.
- Put on a pair of gloves during the process.
- For an easy replacement, you can move the guard, but before using the trimmer, make sure the guard will be returned to the initial right position.
- When the string is getting too short, the system will automatically lengthen it.
Why is My Trimmer Line Often Broken?
As far as we know, the reason for this frequent breaking is that the longevity of the cutting string is over five years old. Therefore, to accurately control the speed of the cutting head when trimming against harsh surfaces, the most effective solution is to replace it.
Is Thicker Trimmer String Better?
There is a wide range of thick trimmer lines. If you need to deal with light works, 0.065″-0.085″ is advisable. And if you want to trim the thicker grass and weeds, a string from 0.085″to 0.110″ will satisfy your needs. Lastly, a line that is thicker than 0.110″ will offer you excellent efficiency to cut dense undergrowth.
What is the Ideal Trimmer String?
Well, 095 inches is the best trimmer line for the budget. It goes with level flight features and rapid acceleration. Hence, you could quickly move the weed eater around and trim the grass or weeds.
What is the Trimmer Line Made of?
According to our knowledge, reinforced composite nylon materials are usually used for producing trimmer lines to enhance their hardiness and breakage resistance. Sometimes, they are added with sturdy metals like aluminum. Moreover, non-nylon polymers or other materials are applied to strengthen the durability of the line as well.
To Wrap Up
So the question “how to replace trimmer line Black and Decker?” is now thoroughly answered, right? As we mentioned before, there are three main steps for you to supersede the string of your trimmer. If you follow our given instructions, we are sure that you will manage to replace your trimmer string in no time.
By the way, we have mentioned many frequently asked questions about this matter so that you can solve your problems related to it.
Have a good day!